High Speed Router Mount
A router mount was designed and built to address the shortcomings of my milling machine’s low spindle speed (3600 rpm) for PCB machining. The mount bolts to the head of...
SX3 CNC Milling Machine
My CNC milling machine is controlled via parallel cable from an old P4 laptop running Mach3. Spindle speed is 0-3600 rpm. The linear drive consists of C6 precision ball screws...
DC Servo Drive
This is a DC Servo drive built in the summer of 2009 for the project “Topology of Dubai” which can be found online at SocialHardware.net. An Atmega88 @ 16...
Centrifugal Separation Technology
A centrifugal separator was designed and built to handle a continuous solid/liquid process stream. The book “Decanter Centrifuge Handbook” by Alan Records and Ken Sutherland was more than instrumental in...
Peristaltic Pump on Servo Drive
A peristaltic pump was required to dose a non-homogoneous solution for a project. Shown here is the pump being driven by a DC Servo, controlled by a laptop over RS232....
Theme by Towfiq I.