Ultrasonic Resonant Tracker
1) Schematic 2) Power (blue) & Phase Angle (pink) 3) Resonant mode frequency sweep 4) AD9833 (MSOP) breakout board As a part of a larger project, the requirement to...
1) Schematic 2) Power (blue) & Phase Angle (pink) 3) Resonant mode frequency sweep 4) AD9833 (MSOP) breakout board As a part of a larger project, the requirement to...
An AVR based R2R DDS with controls for offset and gain. Sine, sawtooth, square and triangle waveforms are stored in look up tables in the Atmega16?s internal flash. An LM358...
A centrifugal separator was designed and built to handle a continuous solid/liquid process stream. The book “Decanter Centrifuge Handbook” by Alan Records and Ken Sutherland was more than instrumental in...
A class AB power amp was designed to run a 200 watt ultrasonic transducer. The topology is a qsc cascode type amp running from +/- 80 volts DC. 1) Schematic ...
A quick mock up of a restaurant/bar with a rolling divider to accommodate varying capacities. Source material from MS paint, tools used were 3DS MAX and Photoshop.
A peristaltic pump was required to dose a non-homogoneous solution for a project. Shown here is the pump being driven by a DC Servo, controlled by a laptop over RS232....
Some mechanical illustrations drawn with 3DS MAX.
Originally created in 3DS MAX and rendered with a car paint material for a Christmas card.