9 Watt LED Desk Lamp
A desk Lamp was realized with a 9w LED module, a salvaged Pentium slot heatsink and an AtMega 8. Two switch mode supplies were used, one to provide 5v for...
A desk Lamp was realized with a 9w LED module, a salvaged Pentium slot heatsink and an AtMega 8. Two switch mode supplies were used, one to provide 5v for...
On short notice I was requested to make a turtle inlay into a cutting board. The source image was clipart provided by Google, polished with a bit of Photoshop, added...
A wind turbine powered weather station displaying temperature, humidity and wind speed by persistence of vision using 8 white LEDs along a wing tip. The turbine blades were cut from...
A capacitive sensor was developed as a feedback method to measure the moisture content of a system. It was based on an AtTiny2313 running on the internal RC oscillator @...
This is a DC Servo drive built in the summer of 2009 for the project “Topology of Dubai” which can be found online at SocialHardware.net. An Atmega88 @ 16...
An Arduino compatible proto board was realized as part of a larger project. Provisions were made to include additional features for future use. The board is based on the Atmega128...
Implemented here is a data logging digital weigh scale. The original scale was gutted, leaving the four strain gauges, one per leg. The main controller is an AtMega32. An AD623...
A complete computer controlled lighting system implemented as an art installation was realized using the DMX-512 protocol. OpenDMX was used for sending packets along a multi-drop RS-485 bus. AtTiny2313?s were...