This candle stick was turned by hand on a lathe more than ten years ago. The inspiration came from a glass candlestick of similar proportions at a department store.
Comments are closed.
So we finally finished putting the polish on our latest Arduino library...
This Arduino library is a mixed bag containing a number of functions...
NoMi Design has been hard at work creating a CNC capable DC...
We’ve implemented an optical infrared Arduino bootloader based on the common 38kHz...
This is a DC Servo drive built in the summer of...
Updates: The leaf vacuum was recently featured on woodgears.ca. You can find...
Software and hardware development have converged into a practical test platform. The...
Supported linear rail can be quite expensive, at over $100 per rail...
A wind turbine powered weather station displaying temperature, humidity and wind speed...
The nAn0 Und3rP4nTs DC Servo is a fully isolated medium power motor...
This candle stick was turned by hand on a lathe more than ten years ago. The inspiration came from a glass candlestick of similar proportions at a department store.
