A class AB power amp was designed to run a 200 watt ultrasonic transducer. The topology is a qsc cascode type amp running from +/- 80 volts DC.
1) Schematic 2) Board 3) Amp 4) Enclosure 5) Scope Trace
Comments are closed.
So we finally finished putting the polish on our latest Arduino library...
This Arduino library is a mixed bag containing a number of functions...
NoMi Design has been hard at work creating a CNC capable DC...
We’ve implemented an optical infrared Arduino bootloader based on the common 38kHz...
This is a DC Servo drive built in the summer of...
Updates: The leaf vacuum was recently featured on woodgears.ca. You can find...
Software and hardware development have converged into a practical test platform. The...
Supported linear rail can be quite expensive, at over $100 per rail...
A wind turbine powered weather station displaying temperature, humidity and wind speed...
The nAn0 Und3rP4nTs DC Servo is a fully isolated medium power motor...
